This Item Has Been Added to Your Quote.


Reach forklift, 53' - Sky Track - 10054

Rental Rates
Description
Sky Trak Reach Forklift 1054

Features
  • 10,000 lb (4,536 kg) capacity
  • Up to 53 ft 2 in. (16.21 m) lift height
  • Sealed bearings extend service intervals, lower maintenance costs
  • Exclusive interlock system keeps outriggers set for full boom extension
  • Unique Stabil-Trak system increases stability
  • Advanced hydraulics for precise load control and more horsepower to the wheels
  • Full time 4-wheel drive and 4-wheel steer
  • Variety of attachments for added versatility


Features
Model 10054
Rated Capacity @ 24 in. (610 mm) Load Center 10,000 lb (4,536 kg)
Maximum Lift Height 53 ft 2 in. (16.21 m)
Capacity @ Maximum Lift Height 4,000 lb (1,814 kg)
Maximum Reach *26 ft (7.92 m) / **39 ft (11.27 m)
Capacity @ Maximum Reach *1,400 lb (635 kg) / **3,000 lb (1,361 kg)
Approximate Operating Weight 27,323 lb (12,394 kg)
Length (Less Forks) 238.8 in. (6.06 m)
Width 102 in. (2.59 m)
Height 101.1 in. (2.56 m)
Wheelbase 119.5 in. (3.03 m)
Outside Turning Radius 164 in. (4.16 m)
Ground Clearance 18 in. (457 mm)
Drive 4 x 4
Engine Cummins QSB4.5T
HP and RPM 110 hp @ 2,500 rpm
Transmission Powershift
Axle - Front High-Bias, Limited Slip
Axle - Rear Planetary
Steering All-Wheel
Tires 17.5 x 25 - 12 ply
Maximum Travel Speed 20 mph (32 kmph)
Frame Tilt Left/Right Frame Leveling ?10 Degrees





Rated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a firm surface with undamaged, properly inflated tires. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.)
  • DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result.
  • DO NOT tip the machine forward to determine the allowable load.

Use only JLG approved attachments with proper material handler model/attachment load capacity charts displayed in the operator?s cab. OSHA requires all rough terrain forklift operators be trained according to OSHA 29 CFR 1910.178 (1).